Debug Board#
This Debug connector is necessary to access the serial Linux console. It connects to the Debug port on the bonded iLCD Linux panels and can be fastened by a screw which is included in the delivery. The numbers next to the jumpers detailed here indicate the pin numbers. Notice the white dot next to pin 1. A suitable cable with serial to USB converter is contained in the delivery.
The board comes in two variants: with and without switches.
Debug Board
| Pin # | Primary Function |
|---|---|
| 1 | Ground |
| 2 | nc |
| 3 | 5 Volt Power |
| 4 | UART_RX |
| 5 | UART_TX |
| 6 | nc |
| JTAG | JTAG Debugger |
3D Model#
Downloads#